The F/Port card is the primary printer interface in some of the older Sienna/Metrum printers. This card was discontinued in 2003 due to our inability to procure one of the major components.
During our recent move we discovered 3 tubes of the Xilinx chip. This allows us to manufacture 148 more boards. We’ve had many calls from Sienna users who can really use this card. We’ve decided to go ahead and build one final batch of cards. Building a short run of a discontinued product is a bit more expensive than when we were in regular production so the price is unfortunately higher. Please note, when this batch of cards is gone there will be no more available, ever.
Please see the F/Port support page (link to fportsupp.htm) for information on installing and using this card with the Sienna printer. Warp Nine will not be offering technical support on using this card in this application. All the information and drivers that we are aware of are on this page. From there you can download the F/Port Manual, Sienna Instructions, and DOS/NT drivers.
Warranty: These cards are warranted for 30 days. All cards are 100% tested prior to shipment. All sales are final. If a card fails upon initial installation we will replace it based upon availability.
| Pricing:
P/N 510-0002 |
| 1 |
$275.00 |
| 2-4 |
$240.00 |
| 5-9 |
$215.00 |
| >10 |
$200.00 |
Anticipated availability: 11 April
In order to reserve your F/Port or place your order, please fill out the attached form and either Fax it to us at (619) 374-2841 or mail it to us at 3800 Ray Street, San Diego, CA 92104. Please note that no credit cards will be charged until the board is ready for shipment. We will add shipping and tax as required. Standard shipping will be UPS ground.
You can also fax or mail your order form. Just fill out the attached Order Form doc and either fax (619) 374-2841 or mail it to us at 3800 Ray Street, San Diego, CA 92104.
Order Form pdf |
